Accessibility  Skip navigation  Site Map  Help  Search field  View shopping cart  View shopping cart  Skip to Navigation
800-819-0559 (Landline) | 400-619-0559 (Cell)
Home >> Pressure Strain and... >> Strain Gages, Access... >> Strain Gage Accessor... >> Strain Gage and Transducer Accessories

Strain Gauge Adhesive Kit
Strain Gage and Transducer Accessories   
 
Strain Gauge Adhesive Kit
Strain Gage and Transducer Accessories:Strain Gauge Adhesive Kit
Click for larger image.
   
• Bridge Completion Resistors
• Strain Gage Adhesives
• Resistance Wire for Temperature Compensation and Zero Balance

View related products - Strain Gages, Accessories and Instrumentation

Click to scroll below to order See Specs PDF Manuals Related Items View a printer friendly page

TERMINAL PADS
Terminal pads serve two main purposes. First, they act as intermediate points for attaching ribbon leads of thin gage wire to heavier instrumentation wires. Second, they provide stress relief to strain gage systems. When the heavy instrumentation wire moves, the terminal pad protects the strain gage.

FIXED BRIDGE COMPLETION RESISTORS
Accuracy:0.1%
Temperature Compensation: 5 ppm (-20 to 80°C/-4 to 176°F)
Power: 1 /4 watt.

ADHESIVES
OMEGA’s TT300 cement is a heat-cured, two-part epoxy adhesive which can be used to bond polyimide backed strain gages for strain measurement up to 200°C (392°F). Each TT300 kit contains 2 bottles of resin and hardener which are premeasured to insure proper mixing proportions. To use, simply pour one bottle of hardener into one bottle of resin and shake for one minute. A bottle each of hardener and resin produce approximately 3 /4 oz. of adhesive. The shelf life of the resin-hardener mixture is six weeks at room temperature. The shelf life of the unmixed components is indefinite, provided the bottles are kept tightly sealed. Each TT300 kit includes 2 oz. of Acetone, Acid Primer, Neutralizer and Rosin Solvent for cleaning and preparing the surface, as well as two funnels and two cap brushes. SG496 and SG401 are general purpose cold-curing one-part glues. They are the easiest and most commonly used adhesive for strain gages. They cure in one minute, but require 24 hours to set. SG401 is an ethyl-based cyanoacrylate and SG496 is a methyl-based cyanoacrylate. There is a one-year shelf life at cool room temperature, but increased shelf life can be obtained by cold storage. The glue temperature range is -65 to 180°F (-54 to 82°C).

NOTE: Additional Hazardous Materials carrier handling surcharges may apply for adhesive products on this page. You will be contacted by Internet Sales to confirm after the order is placed.
Order on www.omegaengineering.cn and 5% will be discounted when you checkout.
  To Order (Specify Model Number)
All list prices are pre-VAT rate not including tax and shipping 		 
 Part Number   Availability   Price(RMB)   Description    Qty.
 TP-1    Consult sales   single terminal pad pair, pkg of 10  
 TP-2    Consult sales   two terminal pad pairs, pkg of 10  
 TP-3    Consult sales   three terminal pad pairs, pkg of 10  
 TP-4    Consult sales   four terminal pad pairs, pkg of 10  
 TP-5    Consult sales   five terminal pad pairs, pkg of 10  
 TP-6    Consult sales   six terminal pad pairs, pkg of 10  
 RES-120 2 Weeks   ¥151.00    120 Ohm bridge completion resistors  
 RES-250 2 Weeks   ¥146.00    250 Ohm bridge completion/4-20 mA shunt resistors  
 RES-350 2 Weeks   ¥143.00    350 Ohm bridge completion resistors  
 TT300    Consult sales   Adhesives  
 SG496 2 Weeks   ¥372.00    1 oz. ethyl-based cyanoacrylate adhesive (bonds approx. 50 gages)  
 SG401 2 Weeks   ¥117.00    0.1 oz. ethyl-based cyanoacrylate adhesive (bonds approx. 50 gages)  
 SGB-36 2 Weeks   ¥955.00    36 gage Balco wire (500 ft) for zero and span temperature compensation, 19.7 Ohms/ft, temp. coefficient 0.45%/°C  
 SGC-36    Consult sales   36 gage Copper wire (1500 ft) for zero and span temperature compensation, 0.415 Ohms/ft, temp. coefficient 0.39%/°C  
 SGM-36 10 Weeks   ¥321.00    36 gage Manganin wire (200 ft) for zero balance, 15.2 Ohms/ft, temp. coefficient 0.002%/°C  
† Price are shown in RMB.

 Note: TT300 KIT INCLUDES:
(2) 1 oz. resin bottles ( 1 /2 filled)
(2) 1 oz. hardener bottles ( 1 /2 filled)
(2) plastic funnels (35 mm diameter)
(2) brush caps
(1) 2 oz. bottle of acetone
(1) 2 oz. bottle of acid primer
(1) 2 oz. bottle of neutralizer
(1) 2 oz. bottle of resin solvent
(1) manual

 Related Links - Manual, Related Products
 Product Manual
   Download  TT300 Series - Adhesive Kit
   Download  SG401 and SG496 - Rapid Cure Strain Gauge Adhesives
 Related Products
RES-2C, RES-5C, RES-2N, RES-5N RES-2C, RES-5C, RES-2N, RES-5N:
Bridge-Balancing and Zero Temperature-Compensation Resistors
BTP-1, RES-120, SGB-36 BTP-1, RES-120, SGB-36:
Strain Gage Accessories: Resistance Wire, Bondable Terminal Pads (BTP), Bridge Completion Resistors
HBM-M-Series HBM-M-Series:
HBM High Temperature Strain Gauges | High Temperature and Resistant to Alternating Loads
   
Keywords:Terminal Pads, Completion Resistors and Cold Cure Adhesives, 3 port solenoid valve solenoid valve manifold static pressure gauge thermal flow sensors

   Back to top Back to top