Suitable for Media Compatible with 316L SS, Inconel X750 & Inconel 600
Voltage or Current Output Models
产品描述
Please note: The PX938 is being phased out and may not be available in the future. Please see the PX656 or PX771A as possible substitutes or contact our Pressure department.
The PX938 is a rugged, high accuracy, wet/wet differential pressure transducer designed for differential or relative pressure measurement of liquids or gases. Its water resistant case and rugged design make it suitable for harsh industrial environments. Models are available in ranges from 0.04 inches of water to 300 psid.
SPECIFICATIONS Excitation: 10 to 30 Vdc for 4 to 20 mA 16 to 30 Vdc for 0 to 10 Vdc ±8 to ±15 Vdc for ±5 Vdc (bidirectional) Output: 4 to 20 mA 2-wire or 0 to 10 Vdc 3-wire (unidirectional ranges); 12 ±8 mA (bidirectional ranges) ±5 Vdc 4-wire (bidirectional ranges) Accuracy: ±0.1% FS BFSL Operating Temp Range: -20 to 121°C (-4 to 250°F) Compensated Temp Range: -20 to 82°C (-4 to 180°F) Thermal Zero Effect: 0.005% FS/°F Thermal Sensitivity Effect: 0.005% rdg/°F Static Pressure: Vacuum to 3000 psig for all ranges Static Pressure Effect: Zero: <0.6% FS/750 psi Span: <0.35% rdg/750 psi Dead Volume: ≤7 ±0.1 cm3 all ranges Response Time: 10 ms Vibration: 50 g up to 2 kHz Body Material: 316L stainless steel Wetted Parts: Inconel X750, Inconel 600 and 316L stainless steel Environmental Sealing: NEMA 4 (IP65) Pressure Connection: G 1/8 female, supplied with brass adaptor to 1/8 NPT female Electrical Connection: PG7 cable gland with screw terminal block accessible under cover Weight: 1.6 kg (3.4 lb) for ≥ 8 inH2O; 1.9 kg (4.2 lb) for <8 inH2O
† 所有金额以RMB显示 注: All PX838's have 1/8" BSP female pressure ports and come with adapters to 1/8 NPT female.
产品编号生成器
在此处生成您自己的产品编号
选项说明:
(1)
Range (W measured in in-H2O otherwise in psi) 选项: 0.04WD for 0-0.04 0.08WD for 0-0.08 0.2WD for 0-0.2 0.4WD for 0-0.4 0.8WD for 0-0.8 02WD for 0-2 04WD for 0-4 08WD for 0-8 20WD for 0-20 40WD for 0-40 80WD for 0-80 0.02WBD for ±0.02 0.04WBD for ±0.04 0.1WBD for ±0.1 0.2WBD for ±0.2 0.4WBD for ±0.4 01WBD for ±1.0 02WBD for ±2.0 04WBD for ±4.0 10WBD for ±10 20WBD for ±20 40WBD for ±40 7.5D for 0-7.5 15D for 0-15 30D for 0-30 75D for 0-75 150D for 0-150 300D for 0-300 3.75BD for ±3.75 7.5BD for ±7.5 15BD for ±15 37.5BD for ±37.5 75BD for ±75 150BD for ±150
(2)
Output 选项: I for 4-20 mA 10V for Voltage Output for unidirectional range 5V for Voltage Output for bidirectional range