If you are looking to outfit your control panel with timers that have an attractive LED display, consider the new PTC-20 series that deliver functionality at competitive prices.
Designed for you to best fit the correct timer to your application, the PTC-20 series is divided into three separate models. The PTC-21 base unit offers five field-selectable operating modes and time ranges as well as a host of other convenient features. The high performance PTC-23 model offers advanced functions such as dual setpoints and 1 ms resolution. The PTC-22 repeat cycle model provides a repeat cycle (batch stop, batch continue) and interval modes specifically tailored for cyclical operations.
With ultimate simplicity in mind, the PTC-20 series utilizes an intuitive button-per-digit method for setpoint input and easy to follow scroll-thru menus for programming. The dual line display optimizes the interface by indicating both the present time value and the setpoint, while up to 8 annunciator lights provide status. Multi-level security enables shop floor access to be custom tailored to your needs.
Intended for tough industrial conditions, the PTC-20 Series offer a NEMA-4/IP65 rated front panel and a high degree of noise immunity. Choose from models with a 5 amp relay, which can directly drive a load, or solid state outputs for high speed applications.
GENERAL SPECIFICATIONS Supply Voltage: 90 to 240 Vac, 50/60 Hz Power Consumption: <10 VA Resolution: Settable for time values in hours/minutes/seconds ranges Inputs Start and Reset: NPN or dry contact Activation Time: 4 ms (24 Vac/Vdc units), 21 ms (85 to 264 Vac powered units) Impedance: 10 kΩ Front-Panel Rating: IEC IP65 Operating Temperature: 0 to 55°C (32 to 131°F) Storage Temperature: -40 to 90°C (-40 to 194°F) Humidity: 5 to 95% RH, non-condensing Memory: Non-volatile Operation Time Ranges: Hours, minutes, seconds; hours, minutes; minutes, seconds Repeat Accuracy: ±0.01% Physical Dimensions: 48 H x 48 W x 85 mm D (1.89 x 1.89 x 3.35") Display: Dual-line, 4-digit, 7-segment LED, 8 mm H (0.31") Mounting: Panel-mount 45 x 45 mm (1.77 x 1.77"), cutout or DIN rail Wiring Connection: Screw terminals on an 11-pin socket Weight: 100 g (3.5 oz)
Base Model PTC-21
Output: Timed relay, DPDT (5 A) Operating Modes (Shown): On-delay, off-delay, on-delay (interval), interval and repeat cycle
Repeat Cycle PTC-22
Inhibit: NPN or dry contact Outputs: Relay: 2 SPDT (5 A), 15 ms latency Transistor: NPN Open Collector: 30 Vdc, 30 mA max Operating Mode (Shown): Repeat Cycle: Batch stop, batch continue and interval
High Performance PTC-23
Inhibit: NPN or dry contact Outputs: Relay: 2 SPDT (5 A), 15 ms max latency Transistor: NPN Open Collector: 30 Vdc, 30 mA max opto isolated Operating Modes: 17 different operating modes available (popular modes shown)
† 所有金额以RMB显示
产品手册:
下载
PTC-21 Series - 1/16 DIN Multi-Display Programmable Timers
下载
PTC-22 Series - 1/16 DIN Muti-Programmable Dual Display Timer