Interfaces Thermocouple, RTD, Voltage, Process Current and Strain Gage Inputs
Works with Black and White or Color Epson Compatible Printers
Time/Date Stamp Prints on Chart Every Tenth Sample
产品描述
The OM-34 is no longer available. Please contact our Data Acquisition department for a possible
substitute.
OMEGA’s OM-34E recorder interface is a unique device that converts your standard Epson compatible printer into a strip chart recorder. You can economically trend thermocouple, RTD, voltage, process current and strain gage input signals on your existing printer without having to buy an expensive flatbed or vertical multi-point chart recorder. The OM-34E is small, portable, easy to set up, and it produces full sized graphs on low cost standard fan-fold printer paper.
The Model OM-34E-PC-LINK has an additional factory installed PC link that connects the OM-34E directly to a PC. The PC can then be used to monitor the process variables connected to the OM-34E.
Two OM-34E interface modules can be connected to the OM-34E for a total of eight channels of recording. When two interface modules are specified, both modules should be the same type, e.g., two OM-34-TC1 thermocouple interface modules.
Also, if power is interrupted while the OM-34E is in printing mode, the unit will remember all configuration data and will resume printing when power is restored without operator intervention.
For complete product specifications see the Related Links section at the bottom of this page.
† 所有金额以RMB显示 注: Comes with complete operator’s manual. Interface modules include cable to connect to OM-34E. Model OM-34E-PC-LINK includes Windows software and RS-232 cable.
