多芯馈通，用于高温密封

MFT Series

Multiconductor Feedthroughs For High Temperature Sealing

查看下面所有型号

下单

Pressure or Vacuum Applications
Seals Multiple Thermocouples
Seals Multiple Protection Tubes
NPT Mounting Thread
Up to 16 Probes in 1 Fitting
Blank Sealing Plugs Included at No Extra Charge
3 to 16 Probes
416SS Body and Cap
316SS Ferrules Standard
PTFE Ferrules Available
Uses Standard OMEGALOK ® Ferrules
.040 Through 1 /4 " Diameter Probes
Blank Sealing Plugs Included at No Extra Charge

热电偶插头和面板系统 - 查看相关产品

产品描述

These all new multiconductor feedthroughs are designed for use in applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy duty 416 stainless steel construction allows this fitting to be used in high pressure or vacuum applications. Probes between 0.040" and 0.250" can be used with these feedthoughs. The maximum number of probes per feedthrough is 3 for 1/4" diameter probes, 5 or 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter and 16 or 0.040" diameter.

All multiconductor feedthroughs are supplied in standard form with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If it is required that the probes be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, allowing the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK™ compression fittings.

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

其他客户同时购买: 这个图标可以点击扩大，跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述

数量

产品描述

MFT-116-8

¥1,721.91

货期: 5 周

Accepts 8 Probes with a Diameter of 1/16", 1/2" NPT Thread

MFT-18-3

¥1,114.65

货期: 5 周

Accepts 3 Probes with a Diameter of 1/8", 1/2" NPT Thread

MFT-18-4

¥1,144.04

货期: 5 周

Accepts 4 Probes with a Diameter of 1/8", 1/2" NPT Thread

MFT-18-6

¥1,272.19

货期: 5 周

Accepts 6 Probes with a Diameter of 1/8", 3/4" NPT Thread

MFT-18-8

¥1,406.71

货期: 5 周

Accepts 8 Probes with a Diameter of 1/8", 3/4" NPT Thread

MFT-316-3

¥1,091.52

货期: 5 周

Accepts 3 Probes with a Diameter of 3/16", 1/2" NPT Thread

MFT-316-5

¥1,266.62

货期: 2 周

Accepts 5 Probes with a Diameter of 3/16", 3/4" NPT Thread

MFT-14-3

¥1,091.52

货期: 5 周

Accepts 3 Probes with a Diameter of 1/4", 3/4" NPT Thread

PFA TAPE

咨询

货期:

Tape used on all Pipe Joints, Dimensions: (LxW) 1/2x260"

T-FER-040

¥601.21

货期: 5 周

PTFE Ferrule, 0.040" Diameter

T-FER-1/16

¥1,487.85

货期: 2 周

PTFE Ferrule, 1/16" Diameter

T-FER-1/8

¥941.00

货期: 2 周

PTFE Ferrule, 1/8" Diameter

T-FER-3/16

¥993.88

货期: 2 周

PTFE Ferrule, 3/16" Diameter

T-FER-1/4

¥941.00

货期: 2 周

PTFE Ferrule, 1/4" Diameter

SS-FER-040

¥449.45

货期: 5 周

316 Stainless Steel Ferrule, 0.040" Diameter

SS-FER-1/16

¥1,059.35

货期: 2 周

Stainless Steel Ferrule, 1/16" Diameter

SS-FER-1/8

¥586.01

货期: 2 周

Stainless Steel Ferrule, 1/8" Diameter

SS-FER-3/16

¥625.87

货期: 5 周

Stainless Steel Ferrule, 3/16" Diameter

SS-FER-1/4

¥552.20

货期: 2 周

Stainless Steel Ferrule, 1/4" Diameter

FTN-1

¥361.89

货期: 2 周

3/4" NPT Male Feedthrough Cap

FTN-1-12

¥381.81

货期: 2 周

1/2" NPT Male Feedthrough Cap

FTN-1-14

¥361.89

货期: 2 周

1/4" NPT Male Feedthrough Cap

† 所有金额以RMB显示
注: All fittings are supplied with stainless steel ferrules. If PTFE ferrules are required, add suffix "-PTFE" to the model number shown. Add $1 to the cost per PFA ferrule. One ferrule needed for each conductor. PFA tape should be used on all pipe joints to provide a good seal and to prevent the threaded parts from seizing each other on disassembly.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)

产品编号生成器

在此处生成您自己的产品编号

	(1)	(2)
MFT-

选项说明:

(1) Diameter of Probe in Inches 选项:
040 for for 0.040 Inch
116 for for 1/16 Inch
18 for for 1/8 Inch
316 for for 3/16 Inch
14 for for 1/4 Inch

(2) Number of Probes 选项:
-3 for for 3 Probes
-5 for for 5 Probes
-6 for for 6 Probes
-8 for for 8 Probes
-10 for for 10 Probes
-12 for for 12 Probes
-16 for for 16 Probes

注: 并非所有组合都有效，请查阅规格表上的有效产品编号。