Independently Calibrated Flow and Totalizer Displays
Two 8-Digit Totalizers
产品描述
The FPM-5500 model has been discontinued. Please see the DPU91-FLOW Series as a possible alternative or contact our Flow Engineering Department.
The FPM-5500 flow monitor is a feature-packed process monitor covering the widest possible spectrum of
applications. Dual totalizers are calibrated independently of the digital analog flowrate. Reset one
totalizer remotely from 100 feet away. Expand the communication range of the system by connecting
peripheral equipment to the isolated frequency out, the totalizer pulse output, the alarm contact
outputs, or the 4 to 20 mA current output. Packaged in a slim-line housing with NEMA-4X shatter-
resistant front panel, the FPM-5500 is the most sophisticated analog monitor available.
SPECIFICATIONS Accuracy: ±0.5% of reading Repeatability: ±0.2% of reading Input: Optically isolated Input Range: 0.5 Hz to 10 kHz Display: NEMA 4X (IP66) Update Rate: 1 s Totalizers: 8-digit resettable with security option 8-digit non-resettable Environmental: Operating temperature: -10 to 55°C (14 to 131°F) Relative Humidity: 0 to 95%, non-condensing Alarm Contacts: High/low pulse programmable Hysteresis: 2% of range (fixed) 2 SPDT Relays: 5 A @ 30 Vdc; 5 A @ 125 Vac; 3 A @ 250 Vac Current Output: 4 to 20 mA, non-isolated, internally powered Update Rate: <100 ms Loop Impedance: 350Ω max @ 12V, 950Ω max @ 24V Accuracy: ±0.1% Frequency Output and Totalizer Pulse Output: Open-collector transistor, optically isolated,
5 mA max sink Totalizer Reset: Front keypad or external contact closure; 30 m (100') max cable length Dimensions: 97 L x 97 W x 76 mm D (3.8 x 3.8 x 3.0") 92 mm² Cutout Compatible Sensors: FP-5300/5100, FP-5200, FP-6000, and FP-5600 (see related links below)
† 所有金额以RMB显示 注: Comes complete with operator's manual.
