8 Single Ended or
4 Differential A/D
Channels, Expandable
to 128
Two Analog Output
Channels
Four Digital I/O
Channels
16-bit Timer/Counter
with Auto-Reload and
Readout Latch
100 kHz Sampling Rate
Bipolar Input Range of
±10 Volts, with Standard
Programmable Gain of
1,2,4 and 8
1, 10, 100, 1000 high
Gain Option
2K Data FIFO
Programmable Scan
FIFO with 2048 Entries
产品描述
The DAQP-208 is no longer available. Please see the INET-100 as a
possible alternative or contact our Data Acquisition department.
The DAQP-208 is a Type II PCMCIA data acquisition card with 4 differential or 8 single ended 12- bit A/D input channels (expandable to 128), with a maximum sampling rate of 100 kHz, and programmable gains of 1,2,4, or 8, which provide ranges of ±1.25 V, ±2.5 V, ±5 V, to ±10 V. A high gain option is also available providing gains of 1, 10, 100 or 1000, for ranges of ±0.01 V, ±0.1 V, ±1 V, to ±10 V The DAQP-208 is also equipped with two 12-bit D/A output channels. The outputs can be updated individually when writing to the corresponding D/A port, or simultaneously when a synchronization signal comes. The DAQP-208 has a 2 K data FIFO which will significantly reduce CPU overhead, and a scan FIFO of 2048 entries, each of which can be specified with an input channel and its associated gain. It has a selectable scan speed of 10 ms to 40 ms per channel. Data acquisition may be initiated by a trigger signal or by using the DAQP-208's pre-trigger capability. The DAQP-208 has a 24-bit auto-reload pacer clock which generates accurate sampling rates from 0.006 Hz to 100k Hz using an internal or external clock source. The pacer clock is actually a 24-bit auto-reload frequency divider. It contains a 24-bit divisor register, a 24-bit counter, and internal clock pre-scaler and a clock source multiplexer. The DAQP-208 also has a 16-bit timer/counter with an auto-reload and readout latch which provides independent timing for the D/A channels, and operates with internal or external clock source and gate controls. The DAQP-208 includes OMEGA’s DAQDRIVE software driver and DaqEZ user friendly data acquisition application software package. All necessary software is included to install and configure the DAQP-208 for use with DOS/Windows 3.xx and Windows 95/98/NT/2000. Signal Conditioning/Expansion The DAQP-208 is compatible with the SignalPro line of signal conditioners. These signal conditioners allow the DAQP-208 to read most process sensors and provides channel expansion up to 256 inputs. See the H section of the hand book for detailed information on the SignalPro line. Software OS Support: DOS, Windows 3.x, Windows 95/98/NT/2000. DAQDRIVE software drivers support numerous programming languages, including Microsoft C/C++, Borland C/C++, QuickBasic, Turbo Pascal and Visual Basic 5.0 or higher (32 bit version) . As part of the DAQDRIVE package, drivers are also included for numerous third-party software packages including Labtech Notebook, DasyLab support, LabVIEW, and SnapMaster. Dynamic Link Libraries are provided as a universal programming interface for development languages targeted for Microsoft Windows. For implementing a fully integrated data acquisition system, OMEGA's DaqEZ user friendly application software package is included free, and will in many cases be all that is needed.
For complete product specifications see the Related Links section at the bottom of this page.
† 所有金额以RMB显示 注: Comes with complete operator’s manual, cable, DaqEZ and driver software on CD ROM.
