Model CLH-II mA Loop CalibratorDiscontinued

CLH-II

Model CLH-II mA Loop Calibrator

查看下面所有型号

下单

Sources and Reads Milliamps
Simulates 2-Wire Transmitters
Powers and Reads 2-Wire Transmitters
Reads and Simulates DP-transmitters in Percent Flow
Fixed Calibration Currents
Auto-Stepping for Hands-Free Calibration
Auto-Ramp Cycling for Endurance Tests
Fixed Currents for Valve Stroking

产品描述

The CLH-II is no longer available. Please review the CL530 Series or the CA-150 Series as potential substitutes, or contact our Temperature Engineering Department.

CLH-II can power (24 Vdc) and read 2-wire transmitters to perform field calibration. Output currents are adjustable with a 10 microamp resolution in both source and transmitter simulation mode.

RAMPING: The calibrator can source or simulate with high resolution a continuous up/down cycling between 4 and 20 mA or 0 and 20 mA. The travel time between limits is 60 seconds.

READING IN PERCENT: The calibrator can display readings in percent of a 4-20 mA or 0-20 mA span. Unit also reads or simulates dP-transmitters directly in percent of flow.

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

产品编号产品描述

数量

产品描述

CLH-II

咨询

货期:

mA Loop Calibrator

CLHPS

咨询

货期:

110V/60Hz power adaptor

† 所有金额以RMB显示
注: CLH-II includes: carrying case, set of batteries, instruction guide and spare fuse.