Large 6000 Count Display with Bargraph and Backlight
•
Polarization Index Measurement (PI)
•
Dielectric Absorption Ratio Measurement (DAR)
•
AC/DC Voltage Measurement from 0 to 600V with Max/Min, Peak and Relative Functions
•
1 to 15 Minute Timer Function for Insulation Resistance Measurements
•
Resistance Measurement
•
Indication of Output Voltage and Discharge Voltage
•
Auto-Discharge Function and Voltage Output Warning Function
•
Autoranging, Auto Power-Off and Battery Check
The HHM-380395 meter provides
four insulation resistance test
ranges plus continuity, AC/
DC voltage, polarization index
and dielectric absorption ratio
measurements. This meter is
shipped fully tested and calibrated,
with proper care and use, will
provide years of reliable service.
Specifications Display: 6000 count LCD display with bargraph Sampling Rate: 2.5 times per second Over Range Indication: “OL” appears on the LCD Short Circuit Current: >200 mA Open Circuit Test Voltage: >4.5V Low Battery Indication: Battery symbol appears on the LCD Power Supply: Eight (8) 1.5V “C” cell batteries (included) or 13.5V 1A AC adaptor Fuse: 500 mA/600V (6 x 32 mm) ceramic 3AG fast blow Auto Power Off: After approximately 20 minutes of inactivity Operating Temperature: 0 to 40°C (32 to 104°F) Operating Humidity: < 80% RH Altitude: Up to 2000 meters (6562 feet) Storage Temperature: -10 to 60°C (14 to 140°F ) Storage Humidity: < 80% RH Dimensions: 198 H x 148 W x 86 mm Diameter (7.8 x 5.8 x 3.4") Weight: Approx. 1438 g (50.7 oz) with battery Safety Standards/Ratings: Pollution degree 2, meets IEC 61010-1 and IEC 61010-031 Category Rating: CAT IV 600V
† Price are shown in RMB.
Note: Comes complete with test leads, 8 C batteries, AC adaptor, and heavy-duty carrying case and operator’s manual.
